Motip 1K Primer Filler - Grey - 500ml

Motip 1K Primer Filler - Grey - 500ml - Flat Mat

MOTIP 1K Primer Filler is a high-quality, universal 1K Primer Filler for pre-treatment or for filling small imperfections in treated and untreated surfaces of sheet steel, galvanized sheet steel and aluminium. 1K Primer Filler can be used either as primer or as filler, depending on the coat thickness.

Usage instructions
Before use, carefully read the directions on the packaging and act accordingly.

1. The surface should be clean, dry and free of grease. Remove loose old lacquer and rust and sand the surface.
2. Before use, shake the aerosol for 2 minutes and spray a sample. Best processing temperature 10 to 25°C.
3. Apply the 1K Primer Filler in several thin coats, respecting a distance of approximately 15 to 20 centimetres to the surface to be treated.
4. Before applying the next layer, it is important to shake the aerosol again.
5. After use, clean the valve (turn aerosol upside down and press the nozzle for approximately 5 seconds).
6. The drying time depends on the ambient temperature, the humidity of the air and the thickness of the lacquer applied.